Backcountry Permit - Attach to Pack

All pages of the backcountry permit MUST be kept together with the front page visible through a see-through pouch (e.g. a quart-size, clear, freezer zipper bag) tied to the outside of your pack (or on vehicle dash when car camping at rim area camps). Any sturdy, see-through pouch will work. For those who choose to use a freezer bag, we suggest making a small hole in the center of the bag just inside of the zipper area, then use a shoelace or small cord through this hole to tie the bag to your pack.
 
backcountry permit
How to attach a Grand Canyon backcountry permit to your pack.

NPS

 
backcountry permit closeup 1
Fold the backcountry permit in half and place inside the bag. Make a small hole in the center of the bag just inside of the zipper area. Get a shoelace or small cord.

NPS

 
backcountry permit closeup 2
Fold the cord in half and feed it through the hole in the bag.

NPS

 
backcountry permit closeup 3
Pull the remainder of the cord through the loop.

NPS

 
backcountry permit closeup 4
Attach to the outside of your pack.

NPS

Last updated: June 11, 2015

Contact the Park

Mailing Address:

PO Box 129
Grand Canyon, AZ 86023

Phone:

(928) 638-7888

Contact Us