• Sun beginning to set at Harpers Ferry, as seen from Maryland Heights. Photo by NPS Volunteer Buddy Secor.

    Harpers Ferry

    National Historical Park WV,VA,MD

John H Hall

rifle part

Detail of Hall Rifle receiver and lock.

In 1819, John H. Hall, a New England gunmaker, signed a contract with the War Department to produce 1,000 breechloading rifles – a weapon he had designed and patented in 1811. Under the terms of the contract Hall came to Harpers Ferry, where he occupied an old Armory sawmill along the Shenandoah River. The site soon became known as Hall's Rifle Works, and the small island on which it stood was called Lower Hall Island. Hall spent several years tooling new workshops and perfecting precision machinery for producing rifles with interchangeable parts – a boldly ambitious goal for an industry which was traditionally based on the manual labor of skilled craftsmen.

In a letter to Secretary of War John Calhoun on December 20, 1822, Hall described his recent accomplishments at Harpers Ferry:

I have succeeded in an object which has hitherto completely baffled (notwithstanding the impressions to the contrary which have long prevailed) all the endeavors of those who have heretofore attempted it – I have succeeded in establishing methods for fabricating arms exactly alike, & with economy, by the hands of common workmen, & in such manner as to ensure a perfect observance of any established model, & to furnish in the arms themselves a complete test of their conformity to it.

During his two decades at Harpers Ferry, Hall developed and constructed drop-hammers, stock-making machines, balanced pulleys, drilling machines, and special machines for straight-cutting, lever-cutting, and curve-cutting. Hall's straight-cutting machine was the forerunner of today's versatile milling machine, and a critical tool used in the fabrication of precision metal firearm components.

Hall's success at Harpers Ferry was attested to by Colonel George Talcott of the Ordnance Department, who wrote in 1832 that Hall's "manufactory has been carried to a greater degree of perfection, as regards the quality of work and uniformity of parts than is to be found anywhere – almost everything is performed by machinery, leaving very little dependent on manual labor."

From 1820-1840, John H. Hall devoted his uncompromising attention to the "uniformity principle" of interchangeable manufacture, laying a solid foundation for America's developing factory system right here at Harpers Ferry.


Bibliography

  • Benes, James J., "An industry evolves: lathes to computers." American Machinist, August 1996.
  • Hounshell, David A., From the American System to Mass Production, 1800-1932. Baltimore: The Johns Hopkins Press, 1984.
  • Huntington, R.T., Hall's Breechloaders. York, Pa.: George Shumway Publisher, 1972.
  • Smith, Merritt Roe, Harpers Ferry Armory and the New Technology. Ithaca: Cornell University Press, 1977.

Did You Know?