Liberty Pool

Liberty Pool with algae in winter

Quick Facts

Location:

Old Faithful

Liberty Pool is a good example of the dynamic nature of Yellowstone's hydrothermal systems. This hot spring was hotter in the past and has, for whatever reason, cooled. When it was hotter, the pool has the typical blue waters of a hot spring where only the hardiest of thermophiles can live. Today, it looks less like a hot spring, with algae mats growing across the top and grass growing right up to the sides. While cooler than most other features in the Upper Geyser Basin, this is still a hot spring. The last known eruption happened in 1888.

Liberty Pool has an average temperate of 100.6°F (38.1°C), an average pH of 8.4, and an average conductivity of 1439 uS/cm.

Hot Springs

Hot springs are the most common hydrothermal features in Yellowstone. Their plumbing has no constrictions.

Superheated water cools as it reaches the surface, sinks, and is replaced by hotter water from below.

This circulation prevents water from reaching the temperature needed to set off an eruption.

Color & Heat Lovers

Hydrothermal features are also habitats in which microscopic organisms survive and thrive. They are called thermophiles: "thermo" for heat and "phile" for lover.

Although they are too small to be seen with the naked eye, trillions are grouped together and appear as masses of color. They are nourished by energy and chemical building blocks.

Colorless and yellow thermophiles grow in the hottest water.

Orange, brown, and green thermophiles grow in cooler waters.

Imagine living in near-boiling temperatures, in hydrothermal features with the alkalinity of baking soda, or in water so acidic that it can burn holes in clothing. Microorganisms in Yellowstone need these extremes to survive.

Upper Geyser Basin

The majority of world’s active geysers are in the Upper Geyser Basin, including Old Faithful. Only four other places in the world have large concentrations of hydrothermal features: Russia (Kamchatka), Chile, New Zealand, and Iceland.

The heat for the hydrothermal features comes from Yellowstone’s volcano. Molten rock or magma may be as close as 3-8 miles (5-13 km) underground. Rain and snow supply water that seeps down several thousand feet (more than a kilometer) below the surface where it is heated.

Underground cracks form a natural plumbing system. Hot water rises through the plumbing to produce hot springs and geysers.

Use Caution in Hydrothermal Areas

• Stay on boardwalks and designated trails.
• Hydrothermal water can severely burn you.
• Never run, push, or shove.
• Supervise children at all times.
• Do not scratch hydrothermal mats.

You are responsible for your safety.

Think safety, act safely. Yellowstone is a dangerous place.