U.S. Highway 89 Bryce Canyon to Grand Canyon
Road damage south of Page, Arizona will impact travel between Bryce Canyon and Grand Canyon National Parks. Click for a travel advisory and link to a map with suggested alternate routes: More »
Sunset Campground Construction
From April-July 2014, three new restroom facilities will be constructed in Sunset Campground. Visitors may experience construction noise and dust, as well as some campsite and restroom closures. 'Sunset Campground' webpage has additional information. More »
Bryce Point to Peekaboo Connector Trail Closure
Due to a large rockslide, the connecting trail from Bryce Point to Peekaboo Loop is closed. Trail will be reopened once repairs are made. The Peekaboo Loop is open, but must be accessed from Sunset or Sunrise Point.
Wall Street Section of Navajo Loop Closed
Due to dangerous conditions (falling rock and treacherous, icy switchbacks), the Wall Street section of the Navajo Loop Trail is CLOSED. It will reopen in Spring once freezing temperatures have subsided.
Backcountry Campsite Closures
Due to bear activity at select campsites in Bryce Canyon's backcountry, two backcountry campsites have been closed until further notice: Sheep Creek and Iron Spring.
Activity 8: Mountain Building
PUSHING AND PULLING MOUNTAINS
Mountains and valleys are created by huge tectonic activity, or movement in the Earth. This movement occurs in many different ways, over millions of years. This lesson will show how mountains and valleys form as the result of tectonic forces.
Instructional Method: Activity
Goal: To experiment with how tectonic forces form mountains.
Objectives: Students will be able to:
Set up: 40 min.
Mountains and valleys form in many ways. Two types of tectonic forces can result in mountains and valleys: compression (squishing) and extension (pulling apart). These forces commonly associate with mountain building but also form valleys.
Compressing continents occur when two continents collide. In crustal collision, the buckling action of rock is similar to what happens to the hoods of cars in a head-on collision. The buckles form mountains and valleys. In rock the buckles can fracture and slide on top of each other, causing that area to increase in thickness.
An example of two continents compressing into each other resulted in the Himalayan Mountains. This happened when India collided with Asia millions of years ago. They are still compressing into each other and the mountains are still growing today.
An older example of the same thing happening in the United States is the Appalachian Mountains. North America and Africa collided about 200-300 million years ago forming this great mountain system. They are no longer growing but diminishing due to erosion over time. Great Smoky Mountains National Park is located in the heart of the Appalachians.
Stretching a continent causes it to thin and break in the same way silly putty breaks when it is cold and stretched quickly. Faults form throughout the stretched portion of the crust and allow large blocks of solid rock to move up or down as dictated by magma movement in the mantle. These massive blocks of rock are called fault blocks.
Fault blocks are divided into two categories: horsts and grabens. A horst is an uplifted fault block and a graben is a fallen or down dropped fault block. A geographic region in the western United States known for horst and graben fault block structures is the Basin and Range. This region begins at Zion National Park and extends into eastern California. A national park sharing the region's name and located within the Basin and Range is Great Basin National Park.
The Plateau region in the Four Corners area of the American southwest (southern Utah, northern Arizona, southeastern Colorado and northwest New Mexico) may have uplifted by the collision of two tectonic plates. However, this area did not get mangled and buckle like the Appalachian Mountains. Buckling occurred close to the plate contacts forming the Sierra Nevada mountains.
The Pacific Plate is thought to have slid under the American plate for a long distance until it sunk deep into the mantle. Once it was deep enough, it melted and the melted rock rose towards the surface. Rising magma uplifted the entire area forming the Colorado plateau. Much of the rising magma remained below the flat-lying crust.
Laccoliths and batholiths formed in locations on the Colorado Plateau where the magma did not break through the surface. These two landforms are like "blisters" of magma under the rocks. Eventually, the magma cooled and hardened forming a solid core of igneous rock. These igneous "blisters" exposed at the surface form batholiths and laccoliths . Batholiths are igneous intrusions with irregular shapes, top and bottom. Laccoliths are rounded on top and have a flat bottom. Scientists believed that because the igneous intrusion was pushed into flat lying horizontal layers the bubble's bottom spread along a bedding plane, giving it a flat bottom.
These blisters form the Henry mountains, Manti-La Sal mountains, San Francisco mountains and Navajo Mountain, among others. Each one of these mountain ranges can be seen from surrounding national parks; Arches National Park, Bryce Canyon National Park, Capitol Reef National Park, Canyonlands National Park and Hovenweep National Monument.
Many times a combination of extension and collision is responsible for the creation of landforms.
1. Instructional Procedures for Creating Activity Tools:
2. Activity Instructions:
What are the different forces that build mountains? How do they work? Are there any mountains near you? If so, do you know how they formed? Can we ever feel mountains moving (yes, earthquakes)? What do we call the shaking we feel when there is movement along a fault?
If foam is not available, try using short stacks of different color paper. Each stack of paper should represent one rock layer. Stacks should be at least 1/8 inch thick and no more than 1/2 inch thick. Each stack should be a different color. Follow steps 2-5 of procedures for building tools in order to create paper rock layers, then proceed with activity.
Have students hypothesize what may happen if forces were placed in different locations or from only one side, etc. Write down the hypotheses. Perform the hypotheses on the foam layers and blocks. Write down what happened to the foam and blocks ( i.e. what landforms they created).
Included National Parks and other sites:
Arches National Park
Utah Science Core:
4th Grade Standard 4 Objective 1,2
Did You Know?
The Bryce Canyon Lodge, constructed in multiple phases throughout the 1920s, is a National Landmark on the National Register of Historic Places. It is the last of the original lodges, designed by Gilbert Stanley Underwood and built by the Utah Parks Company, to survive within the Grand Circle. More...